Aquatic Division DOJO 6'4"

2+1 Egg with soft top EPS core produced by Yasushi Yoshida, a longboarder representing Shonan and Kugenuma.

Yasushi Yoshida, a longboarder representing Shonan/Kugenuma, is renowned for his classic style centered around nose riding. DOJO is his first mid-length signature board, part of the AQUATIC DIVISION FAR EAST SERIES, developed with Japanese riders in mind.

He currently coaches professionals and amateurs alike, and has created an egg board that can be enjoyed by surfers of all wave sizes and levels. At the same time, it was developed with the goal of allowing parents and children to surf casually, enjoyably, and safely.

The 2+1 fin setup makes it suitable for a wide range of conditions, from small waves to overhead surf.

About Yasushi Yoshida

Yutaka Yoshida was born in 1981 and is originally from and currently lives in Fujisawa City, Kanagawa Prefecture. He is a longboarder representing Shonan and Kugenuma, known for his classic style centered around nose riding. He has won the JPSA special STYLE MASTERS twice and the JPSA Shizunami, among other professional contests. He also worked as a buyer for one of Japan's leading sports chains and later as a manager at a global select shop. Starting in 2023, he will be running a surfing school at the surfing dojo CHABORING DOJO, where he aims to deepen his understanding and exploration of longboarding, and he also serves as a judge for professional contests.

AQUATIC DIVISION

BEACHED DAYS' surf gear line, AQUATIC DIVISION, offers surf gear that is recognized by professionals both in Japan and overseas, including a new standard surfboard with a soft top and EPS core that perfectly replicates Chris Christenson's masterpiece, as well as fins and wetsuits that were repeatedly tested in California by brand founder Mitch Absher and others.

You can choose from three lengths: 6'4", 6'8", and 7'2".

For a 6'4" length, we recommend Captain Finn's CF Slasher 7.5" and Side Biters 3.75 .

IXPE soft top, non-rubbing wax-on type

We use IXPE material to prevent the soft top from rubbing against the surface, so we recommend using wax.

Shaped with the world's highest level of technology by AKU Shaper

The EPS foam is shaped by the world's most advanced AKU Shaper, faithfully recreating the bottom concave, and is then double coated with fiberglass to achieve maximum strength.

The exterior is made of 4mm thick IXPE foam on the deck and HDPE skin on the bottom, with a soft surface created using vacuum bag technology.

Internal structure and details

● Two Wood Stringers for strength and flexibility. ● High density waterproof EPS foam. ● Epoxy resin coating. ● Double 6oz fiberglass and epoxy resin for extra reinforcement. ● 4mm IXPE foam. ● Epoxy resin coating. ● 6oz fiberglass. ● Epoxy resin coating. ● Gloss HDPE bottom.

ATTENTION

●Regarding fin screws: You can use your own fin screws, but in rare cases they may be difficult to close, so we recommend using the included fin screws.

●If the board is exposed to high temperatures or direct sunlight for an extended period of time before use, bubbles may appear on the board or the color may fade. Store the board in a cool, dry place away from direct sunlight and heat. Do not leave the board in a car for an extended period of time.
Due to the nature of the material used in the softboard, it will absorb some water, which is normal and not a defect. This water will usually drain away after use.

Daily maintenance: After each use, rinse your board with fresh water to remove any dirt, sand or salt, then wipe with a clean cloth or towel and store in a cool, dry place away from direct sunlight. Do not use solvents or cleaners on your board.
Rinse your board with fresh water, wipe it clean and dry before storing it in your board bag or board sock.

If you are going to attach the board to a roof rack or similar and drive while the water is still draining, a thin waterproof cover that only covers the top is useful. This will prevent water from dripping off the board and make it easier to dry. Once you get home, remove the cover and let the water drain.

Free shipping to your home

We will ship to your home free of charge via Sagawa Express.

*Surfboards can only be delivered to Okinawa and remote islands if the recipient has a corporate name. In this case, shipping will be via JP Logistics and an additional shipping fee of 7,700 yen (tax included) will be charged.